Département commercial - Pologne

Tel.: +48 52 326 71 52

Département commercial - Export

Tel.: +48 52 326 71 53


Liste des catalogues


Toutes les marques utilisées sur ce site, ainsi que dans les catalogues sont utilisés uniquement à des fins d'identification. Tous les produits inclus peuvent ne pas être les pièces d'origine, et les remplacements correspondant. Photos et dessins sont purement illustratifs. S'il vous plaît considére PRODUCTS INFO.



Liege AB VO SC AKC1294

  • NUMBER: AKC1294
  • EAN: 5901741301331
  • Poids: 0.20 KG

Moreover, it is made of materials: 3020701221 plastic. The diameter is 60 mm. The inner diameter has 58 mm. Fastening is keys 2szt.


Filler cap is a device responsible for closing the filler in the petrol tank. Filler cap is made of plastic material, resistant to fuel impact. It has a rubber seal which protects and caulks the filler from the outflow.

Filler cap should be mounted to cars that have the fuel filler adjusted to his kind of cap and cars that have the fully functional.

While using the caps, it is forbidden to use them in cars, where the petrol filler is not adjusted to the specific kinds of caps. It is also forbidden to use any additional devices while unbolting/bolting/ caulking the cap, because it may cause its failure. Caps may be used only in accordance with their destination.

1. Take the cap out of the package 2. Remove the foil 3. Screw the cap in the fuel filler 4. Tighten the cap with the reasonable strength, in order that the seal will not be damaged 5. In the caps with the key, twist the key in order to close the cap and gently check whether the cap grinds securely and safely to the petrol filler.

, 3020701221 plastic
Diameter 60 mm
Inside diameter 58 mm
Mounting keys 2szt