DO YOU HAVE A QUESTIONS?

Sales department - Polska

Tel.: +48 52 326 71 52

Sales department - Export

Tel.: +48 52 326 71 53

yt.jpg

Catalogs list

IMPORTANT INFORMATION

All trademarks used on this site, as well as in the catalogue are used only for identification purposes. All listed products may not be the original parts just matching spare parts. LED warning lamps are only destined for use off public roads. Photos and drawings are purely illustrative. Please consider PRODUCTS INFO.

SECURITY

Security

Warning lightbar LED 1172mm R65 R10 BLK0008

  • NUMBER: BLK0008
  • EAN: 5901741301744
  • Weight: 11.86 KG

WARNINGS FOR THE USER:
• Do not look directly into the light - it may cause damage or even loss of vision.
• Install only in specialized workshops or professional services.
• Use in open space only.
• Use in accordance to the purpose.

INSTALLATION INSTRUCTIONS:
• It should be used exclusively in accordance with intended use.
• Mount exclusively in specialized workshops.
• The connection between the lamp and vehicle’s installation should be isolated with heat-shrink tube, or, alternatively, with isolating tape, to avoid getting water and moisture to the copper wire of the lamp, which can damage electronic components. When it comes to lamp and plug, the plug should be mounted safely.
• Do not cut off tinned ends.
• Lamps must be installed only in accordance with UNECE regulations - Only mount the lamp to a flat, metal, dry, cleaned and degreased roof surface. The maximum speed of movement of the vehicle with a warning lamp attached with a magnet to the roof surface is 50km/h. Take special care in windy conditions. Do not unscrew the lamp, it will lose its water resistance.