Flash lamp LED 3 screw R10 R65

The LED warning light with 3 screws R10 R65, model ALR0074, has the following functions: 3 warning flashes. It is equipped with 24 LEDs. ALR0074 is characterized by a power consumption of 25 W. ALR0074 is a certified product. In accordance with standards such as ECE, ECE. The LED warning light with 3 screws R10 R65 is mounted using 3 screws. The voltage is 12 V / 24 V. The product is packed in the following configuration: dimensions 110x110x90 mm, R10, R65, weight: 280 g, master carton, 20 pcs/carton.

WARNINGS FOR THE USER:

• Do not direct the light beam toward the eyes – this may cause injury or even loss of eyesight.
• Installation only in specialized facilities or professional service centers.
• Use in well-ventilated areas.
• Use as intended.

INSTALLATION INSTRUCTIONS

• Use only as intended.
• Install only in specialized workshops.
• The connection of the lamp to the vehicle installation must be insulated with heat-shrink tubing or, alternatively, insulating tape in order to prevent water and moisture from entering the lamp’s copper wire, which may cause damage to the electrical system. In the case of lamps with a plug, the plug must be securely connected.
• Do not cut off the tinned ends of the wires.
• Lamps must be installed exclusively in accordance with UN ECE regulations.